top of page

Recent Repairs

ESP LTD Eclipse
 

This needed alot of TLC. Most of the frets were really flat and very uneven with oxidation starting. The original molded plastic nut was not in the greatest of shape, and the bridge and tailpiece had seen better days.

CLICK ON IMAGES TO SCROLL
1970's Aria
 

!970's Japanese Aria. Complete overhaul into custom Iron Cross Guitar. This guitar was pretty beat up when i received it. Started with Complete re-fret, upgraded to stainless steel frets and custom made TUSQ XL Nut, Installed set of Seymour Duncan Alpha & Omega pickups with all new pots/switch's/jack and wiring. upgraded to locking tuners and finished it up with custom purple Iron Cross emblem and stripes! 

"Pennywise" Project
 

Received this guitar from a family member around Halloween and decided to keep the Halloween spirit alive! Wrapped headstock, and custom cut vinyl with new pots and knobs, and topped it off with blood red pickup rings! fun and simple project that now hangs in my studio!

Squier Bullet Overhaul
 

20+ Year old Fender Squier Bullet that has not been played in some time. Started by taking apart and cleaning entire guitar. Cleaned and polished all metal components. Replaced pickgaurd and installed set of Fender Tex-Mex pickups including new pots, 5-way switch and all wiring. Then finished with fret leveling and crowning of frets 1-7. Sounds and plays fantastic, like a completely different guitar now!

Bartolini Pick Up Install
​

Bartolini Pickup and shielding install on Fender Active Jazz Bass.

Ovation (1986)

Beautiful Ovation that needed just a little TLC. Was purchased with Eric Johnson signature in red sharpie on white body and a chip on the headstock. Removed the signature, leveled and re-crowned frets and repaired chip in headstock. Plays and sounds beautiful.
Sterling Music Man StingRay

Frets were in rough shape, complete re-level, crowning and setup. Looks and plays better than new!
Leo James LP Build
 

Completely upgraded!! Started off with some fret leveling and re-crowning. Replaced the white plastic nut with a Graphtec TUSQ XL black nut.  Replaced and upgraded all of the chrome hardware to black hardware including, bridge and tailpiece, output jack and locking tuning machines. Then to top it off installed a set of Seymour Duncan Invaders!! This guitar is now a beast and sounds like a beast as well!!

Sustainiac Install on Fender Stratocastor
 

Here is an awesome upgrade, Fender Stratocastor with Sustainiac pickup and fretwork.

Gibson Les Paul Studio Overhaul
 

Awesome red and gold Gibson Les Paul Studio. Pick ups swapped out to Seymour Duncan SH-4 JB & SH-2 JAZZ HOT RODDED set and brand new Pots, Output Jack and Switchcraft 3 way switch. Not to mention brand new gold roller bridge!

Warwick Neck Replacement w/headstock wrap and custom Logo
 

Warwick Rock Bass neck replacement, Truss rod snapped in old neck, customer wanted Spector neck installed. Installed wrap on headstock with custom truss rod cover logo!

Dirty Fingers pick up install Epiphone SG 
 

Gibson Dirty Fingers pickup and adjustable bridge install.

Fender JazzBass
 

Some Fret leveling and re-crowning

Overnight Nut Replacement Before a Gig
 
Contacted me before a gig, right part of nut broke off on Fender Jazz Bass. Replaced nut and a fret polish.
Gretsch Semi-Hollow
 

Full setup with fret leveling and crowning. Plays like a dream!!

Charvel

Customer purchased this used. Neck pickup and 3-way switch didnt work. Opened it up and it was a rats nest. Electrical tape was holding everything together and a was not grounded correctly.
bottom of page